These work gloves are designed to withstand the stresses that arise during demolition work and other heavy manual tasks. The palms and fingertips are reinforced with Armortex® material, which increases durability and protects against wear.

The gloves are equipped with Smartswipe™ technology, which makes it possible to operate touch screens without taking them off. The inside has a breathable tri-cot lining, which contributes to comfort and ventilation during use.

In addition, they have extra protection over the knuckles, a sweat-absorbing area, and an adjustable Velcro closure that ensures a good fit. The gloves meet the requirements of CE category 2 as well as standards EN 420 and EN 388 (2221).

The Milwaukee HI-DEX CUT D is a cut-resistant glove made from 18G material, providing a thin and flexible construction with high mobility. The glove is developed for precision tasks where both protection and dexterity are crucial.

The palm is coated with polyurethane, which provides a good grip while maintaining a low weight. The material is breathable, allowing the glove to be worn comfortably throughout the workday.

Between the thumb and index finger, there is a nitrile reinforcement that increases durability in an area often exposed to stress. The glove is also equipped with SMARTSWIPE™ fingertips, allowing the operation of touchscreens without removing the gloves.

The product can be washed up to five times without losing its properties, extending its lifespan and reducing waste. The glove is certified according to EN ISO 21420 and EN388:2016 (4X42D) and approved according to UKCA, EAC, and Ukrainian standards.

The Guide Work Glove 5112 in size 8 is made of synthetic leather and designed to provide a good balance between durability and flexibility. The half-lined construction makes the glove comfortable to wear for extended periods.

The glove has a pre-curved fit that follows the natural shape of the hand, and reinforcement over the knuckles that increases comfort and protects against impact. The padded palm and short cuff contribute to a comfortable and flexible fit.

An elastic band at the wrist ensures that the glove fits snugly and securely during use. The model is tested according to EN 388 2111X, EN 407 X1XXXX, and EN 21420, which document its level of protection and quality.

Milwaukee Gloves Cat. 3 are developed to provide effective protection against cuts and sharp objects. The gloves have a cut resistance of Level 3, making them suitable for work involving materials with sharp edges.

The surface is designed to provide a secure grip, allowing the user to work precisely and steadily even under demanding conditions. The gloves are also equipped with SMARTSWIPE™ technology in the palm and fingertips, enabling touchscreen operation without removing the gloves.

This model comes in size XXL/11 and in a pack of 12 pairs, making it suitable for both professionals and businesses that need multiple sets for work use.

The Guide 5112 is a half-lined work glove designed to provide both protection and comfort during demanding work tasks. The glove is made of synthetic leather, which offers a good balance between durability and flexibility.

The pre-curved fit and reinforcement over the knuckles contribute to natural movement and increased durability, while the padded palm provides extra comfort during extended use. The cuff is made in a semi-short model, making the glove easy to put on and take off.

An elastic around the wrist ensures that the glove fits snugly and securely during work. The model is tested according to standards EN 388 2111X, EN 407 X1XXXX, and EN 21420, which document its protective properties against mechanical and thermal influences.

Milwaukee Impact-Resistant Gloves Cut E in size 11/XXL are designed to protect hands from both cuts and impacts. They are made with an impact-resistant material on the back of the hand and fingers, which reduces and absorbs shocks during work.

The gloves have a reinforced nitrile coating that provides extra protection between the thumb and fingers. The nitrile material ensures excellent grip, even under demanding conditions with oil or high temperatures.

The SMARTSWIPE™ function in the palm and fingertips makes it possible to operate touchscreens without removing the gloves, increasing work efficiency.

The gloves are certified according to European standards for cut resistance, impact, and heat protection: EN ISO 21420, EN388:2016 (4343EP), and EN 407 (X1XXX).

The Guide Work Glove GUIDE 44 is a versatile glove made of goatskin, which provides a good balance between durability and flexibility. The material makes the glove suitable for tasks where both protection and mobility are important.

The back is made of cotton, which contributes to breathability and comfort during extended use. The glove closes with Velcro at the wrist, allowing the fit to be adjusted as needed.

The model covers sizes from 6 to 13 and is tested according to the EN 388 2022X standard, which indicates resistance to mechanical risks. This makes it suitable for general craft work, assembly, and light industrial tasks.

The Milwaukee HI-DEX CUT C is a cut-resistant glove developed for tasks where precision and safety must go hand in hand. The glove is made from an 18G material, providing a thin and flexible construction that maintains high mobility during work.

The palm is coated with polyurethane, which provides a good grip while maintaining breathability, keeping hands comfortable during extended use. Between the thumb and index finger, there is a nitrile reinforcement that increases durability in a high-wear area.

The fingertips are equipped with SMARTSWIPE™ technology, allowing the operation of touchscreens without removing the gloves. The gloves can be washed up to five times, extending their lifespan and reducing waste.

The product is certified according to EN ISO 21420 and EN388:2016 (3342C) and approved under UKCA, EAC, and Ukrainian standards, demonstrating its level of protection and quality.

The Guide 2000W is a winter-lined glove made of full leather, providing a robust and durable surface while maintaining good suppleness. The glove is fully lined to ensure warmth and comfort when working in cold environments.

The material consists of goatskin leather, known for its combination of strength and flexibility. The open cuff makes it easy to put on and take off the glove while providing good ventilation around the wrist.

The glove is designed for general craft work and meets the requirements of the EN 388 standard with the classification 2121X, indicating its resistance to abrasion, cuts, tearing, and punctures.

The size range covers from 7 to 12, making it possible to find a suitable fit for different hand sizes.

Milwaukee Impact Resistant Gloves CAT 3 M/8 are developed for users who need effective hand protection when working with tools and materials where there is a risk of impact. The gloves are made from durable materials and have reinforced areas that protect against shocks and pressure.

The size M/8 fits medium-sized hands and provides a snug yet flexible fit, allowing good finger sensitivity during work. The construction is adapted for professional use, where both safety and freedom of movement are important.

As part of Milwaukee's range of safety equipment, the glove belongs to the CAT 3 class, indicating a high level of protection against mechanical impacts. It is suitable for craftsmen, fitters, and other professionals working in environments with a risk of impact or heavy strain on the hands.

The Guide 775W is a wind and waterproof work glove designed to protect the hands under demanding conditions. It is made with synthetic leather in the palm, providing a solid and secure grip on tools and materials.

The glove is fully lined, which contributes to warmth and comfort, especially when working in cold environments. The combination of a lined interior and waterproof exterior makes it suitable for both outdoor and indoor use, where moisture and cold can be a challenge.

The model covers sizes from 6 to 13 and meets the requirements of standards EN 388 1121X and EN 511 X2X, which document its level of protection against mechanical and cold-related impacts.

Milwaukee Work Gloves Leather M/8 are made of durable leather that provides good protection against mechanical wear while maintaining a certain flexibility, allowing the hands to move freely during work.

The gloves are designed to withstand daily use in demanding environments where grip, durability, and comfort are crucial. The leather material contributes to a natural fit that shapes to the hand over time.

This model in size M/8 fits users with medium-sized hands and is suitable for a wide range of manual tasks, including construction, assembly, and maintenance.

Guide 1951 is a heavy-duty, half-lined work glove made of soft and durable cow split leather, providing a good balance between flexibility and durability. The glove is designed for rougher work tasks where the hands need protection from wear and impact.

The back is made of cotton, which contributes to breathability and comfort during use. The inside is partially lined with cotton, providing a comfortable fit and reducing the risk of irritation during prolonged use.

To increase protection, there are extra reinforcements on the fingers and knuckles, and the glove is equipped with a safety cuff that protects the wrist from friction and impact. The glove meets the requirements of standards EN 388 3143X and EN 407 X2XXXX, which document its resistance to mechanical and thermal influences.

Milwaukee GLOVES IMPACT-RESISTANT CUT 5/E - L/9 are designed to protect the hands from both impacts and sharp objects. The gloves are made with an impact-resistant material on the back of the hand and over the fingers, which reduces and absorbs shocks during work.

The double nitrile coating increases durability and provides an effective barrier against sharp edges and rough surfaces. At the same time, the coating contributes to a good grip, even under demanding conditions.

Reinforced areas in nitrile provide extra protection and wear resistance, making the gloves suitable for use in environments where metal, tools, or heavy materials are handled.

The size L/9 fits most standard-sized hands and ensures a good balance between mobility and protection.

Guide 8010 is a vibration-damping work glove designed to protect the hands from vibrations from machines and hand tools. The glove is part of Guide's Vibro series and combines comfort with functional protection.

The palm is equipped with a 6 mm thick anti-vibration material, which is coated with Guide's Premium PU synthetic leather. This construction provides both good damping and a secure grip during work.

The back of the hand is made of nylon, which contributes to flexibility and breathability. The glove is tested according to EN ISO 10819:2013/A1:2019, which documents its ability to reduce vibration transmission to the hand.

The model in size 12 is intended for larger hands and provides a spacious fit without compromising mobility or tool sensitivity.

Milwaukee Gloves Winter Cat. 3 are developed for use in cold work environments where warmth and comfort are crucial. The gloves have an insulating inner lining that helps keep hands warm while protecting against moisture and water penetration.

The material is designed to provide a good balance between flexibility and protection, allowing the user to maintain dexterity even during prolonged use. The gloves are certified according to EN388, EN511, and EN420, which document their resistance to mechanical risks, cold, and general protective glove requirements.

This variant is supplied in size 8/M and in a pack of 72 pcs, making it suitable for companies or workplaces that require larger quantities of protective gloves.

The Guide 5112 is a half-lined work glove made of synthetic leather, designed to provide both protection and freedom of movement during work. The padded palm contributes to comfort, while the material ensures a good balance between durability and flexibility.

The glove has a pre-curved fit that follows the natural shape of the hand, and a reinforcement over the knuckles that increases durability in exposed areas. The short cuff and the elastic around the wrist ensure that the glove fits snugly and securely on the hand.

The model is tested according to standards EN 388 2111X, EN 407 X1XXXX and EN 21420, which document its level of protection against mechanical and thermal influences. It is suitable for many types of craft and assembly tasks where both precision and comfort are important.

Milwaukee Impact-Resistant Gloves Cut E 10/XL are designed to protect the hands from both impacts and sharp objects. They are made with an impact-resistant material on the back of the hand and fingers, which reduces and absorbs shocks during work.

The gloves have a reinforced nitrile coating that provides extra protection between the thumb and fingers. The nitrile material ensures a solid grip, even under difficult conditions such as oil or extreme temperatures.

SMARTSWIPE™ technology in the palm and fingertips makes it possible to operate touchscreens without removing the gloves, increasing work efficiency.

The gloves are certified according to European standards for cut resistance, impact, and heat protection, including EN ISO 21420, EN388:2016 (4343EP), and EN 407 (X1XXX).

The Milwaukee HI-DEX CUT D is a cut-resistant glove developed for tasks that require both protection and precision. The glove is made from an 18-gauge material, providing a thin and flexible construction that maintains good finger mobility.

The palm is coated with polyurethane, providing a secure grip while maintaining a light and breathable feel during use. Between the thumb and index finger, there is a nitrile reinforcement that increases durability in a high-wear area.

The glove is equipped with SMARTSWIPE� fingertips, allowing the operation of touchscreens without removing the gloves. It can be washed up to five times, extending its lifespan and reducing waste.

The product is certified according to European standards for cut resistance, including EN ISO 21420 and EN388:2016 (4X42D), as well as UKCA, EAC, and Ukrainian standards.

Milwaukee Gloves Cat. 5 are designed to protect hands from injuries caused by sharp objects and materials. The gloves are certified according to European standards for cut resistance at level 5, providing a high degree of safety when handling metal, glass, or other sharp surfaces.

The grip zones are equipped with a double layer of material, which improves grip and ensures stable handling, even under changing temperatures or on oily surfaces. This construction makes the gloves suitable for demanding work environments where precision and control are necessary.

The gloves also feature SMARTSWIPE™ technology in the palm and fingertips, allowing the operation of touchscreens without removing the gloves. The specially woven material also provides high finger sensitivity and comfort during use.

The model in size XXL/11 comes in a pack of 12 pairs, making it suitable for both individual users and companies that need multiple sets for the workplace.